Typical Tensile Properties
| Ar (I1) EN As welded | ||||
| Elongation | Tensile Strength | Yield Strength | Stress Relieved Temperature | Stress Relieved Testing Time |
| 26 % | 595 MPa | 525 MPa | – | – |
| Ar (I1) AWS As welded | ||||
| Elongation | Tensile Strength | Yield Strength | Stress Relieved Temperature | Stress Relieved Testing Time |
| 30 % | 610 MPa | 510 MPa | – | – |
| Ar (I1) AWS Stress relieved | ||||
| Elongation | Tensile Strength | Yield Strength | Stress Relieved Temperature | Stress Relieved Testing Time |
| 32 % | 525 MPa | 400 MPa | 620 °C | 2 hr |
Typical Charpy V-Notch Properties
| Ar (I1) EN As welded | |||
| Impact Value | Testing Temperature | Stress Relieved Testing Temp | Stress Relieved Testing Time |
| 150 J | -40 °C | – | – |
| Ar (I1) AWS As welded | |||
| Impact Value | Testing Temperature | Stress Relieved Testing Temp | Stress Relieved Testing Time |
| – | -30 °C | – | – |
| 100 J | -46 °C | – | – |
| Ar (I1) AWS Stress relieved | |||
| Impact Value | Testing Temperature | Stress Relieved Testing Temp | Stress Relieved Testing Time |
| 80 J | -46 °C | 620 °C | 2 hr |
Typical Weld Metal Analysis %
| Mn | C | Si |
| 1.68 % | 0.074 % | 0.95 % |
| Approvals: | ABS, 3Y (I1), BV, 3YM (I1), CE, EN 13479, DNV-GL, III YM (I1), LR, 3Ym H15 (I1), NAKS/HAKC, 1.6MM-2.4MM, VdTÜV, 05260 |
| Classifications: | EN ISO 636-A, W 46 4 4Si1, Weld Metal, EN ISO 636-A, W4Si1, Wire Electrode, SFA/AWS A5.18, ER70S-6, Wire Electrode |
Approvals are based on factory location. Please contact ESAB for more information.
| Alloy Type: | Carbon-manganese steel |










