Typical Tensile Properties
| AWS Ar (I1) PWHT 620°C 1h | ||
| Elongation | Tensile Strength | Yield Strength |
| 28 % | 610 MPa | 510 MPa |
| AWS Ar (I1) As welded | ||
| Elongation | Tensile Strength | Yield Strength |
| 27 % | 620 MPa | 520 MPa |
| EN Ar (I1) PWHT 620°C 1h | ||
| Elongation | Tensile Strength | Yield Strength |
| 31 % | 550 MPa | 450 MPa |
| EN Ar (I1) As welded | ||
| Elongation | Tensile Strength | Yield Strength |
| 30 % | 600 MPa | 490 MPa |
Typical Charpy V-Notch Properties
| AWS Ar (I1) PWHT 620°C 1h | |
| Impact Value | Testing Temperature |
| 220 J | -20 °C |
| AWS Ar (I1) As welded | |
| Impact Value | Testing Temperature |
| 150 J | -29 °C |
| 130 J | -46 °C |
| EN Ar (I1) PWHT 620°C 1h | |
| Impact Value | Testing Temperature |
| 190 J | 20 °C |
| 170 J | -20 °C |
| EN Ar (I1) As welded | |
| Impact Value | Testing Temperature |
| 180 J | 20 °C |
| 160 J | -20 °C |
| 90 J | -40 °C |
| 25 J | -60 °C |
Typical Weld Metal Analysis %
| Mn | Mo | C | Si | Ni | Cr |
| 1.09 % | 0.45 % | 0.094 % | 0.61 % | 0.05 % | 0.05 % |
| Approvals: | CE, EN 13479, DB, 42.039.08, DNV-GL, III YMS (I1), NAKS/HAKC, 2.0MM-3.2MM, VdTÜV, 04950 |
| Classifications: | EN ISO 636-A, W 46 2 W2Mo, Weld Metal, EN ISO 636-A, W2Mo, Wire Electrode, EN ISO 21952-A, W MoSi, Wire Electrode, EN ISO 21952-B, W 52 1M3, Wire Electrode, SFA/AWS A5.28, ER70S-A1 (ER80S-G), Wire Electrode |
Approvals are based on factory location. Please contact ESAB for more information.
| Alloy Type: | Low alloyed steel (0.5 % Mo) |
Sản phẩm tương tự
Que hàn TIG
Que hàn TIG
Que hàn TIG
Que hàn TIG
Que hàn TIG
Que hàn TIG
Que hàn TIG